• Wired 10/100Base-T network interface
• Secure hardware encryption engine
• Unique peripheral interface flexibility
• Dynamic power management
• Development kits for NET+OS® and Linux®
• iDigi® Enabled

• Integrated 10/100 Mbit Ethernet interface
• Strong enterprise-grade network security
• Common family footprint for wired and wireless modules
• High-speed serial interface (UART)
• Development kits for NET+OS® and Microsoft® .NET Micro Framework
• iDigi® Enabled

• 802.11b wireless networking with 802.11i security
• Common family footprint for wired and wireless modules
• Integrated High-speed serial interface (UART)
• Pre-certified radio and extended operating temperature
• Development kits for Digi plug-and-play firmware and NET+OS®
• iDigi® Enabled

• High-end 1 GHz Cortex-A8 System-on-Module solution
• 802.11abgn, Bluetooth 4.0, Ethernet and CAN Bus connectivity
• Integrated 2D/3D graphics and 1080p video processing

• 800 MHz Cortex-A8 System-on-Module solution
• Integrated Ethernet and 802.11abgn networking
• Powerful 2D/3D and 720p video capabilities

• 533 MHz ARM9 System-on-Module solution
• Compact design with 802.11abg and Ethernet connectivity
• Extended and industrial operating temperature

• 533 MHz ARM9 System-on-Module solution
• Compact design with integrated Ethernet networking
• Extended and industrial operating temperature

• Compact, cost-efficient 150 MHz ARM9 module
• Secure 802.11abg Wi-Fi networking
• Programmable interface modules
• Dynamic power management options

• Compact, cost-efficient 150 MHz ARM9 module
• Secure high-performance Ethernet networking
• Programmable interface modules
• Dynamic power management options

• Embedded M2M gateway module with customization options
• Universal 2G/3G cellular connectivity, GPS option and Ethernet
• Future-proof design with 4G upgrade path

• No configuration needed for out-of-the-box RF communications
• Common XBee footprint for a variety of RF modules
• Fast 250 kbps RF data rate to the end node
• 2.4 GHz for worldwide deployment
• Sleep modes supported for extended battery life

• 868 MHz short-range device G3 band for Europe
• No configuration needed for out-of-the-box RF communications
• Common XBee® footprint for a variety of RF modules
• Outdoor RF line-of-sight range up to 80 km
• Simple to use peer-to-peer or point-to-multipoint topology

• Dynamic peer-to-peer DigiMesh protocol with sleeping routers
• No configuration needed for out-of-the-box RF communications
• 2.4 GHz globally deployable frequency
• Self-healing and discovery for network stability
• Multiple antenna options for both low power XBee and extended range XBee-PRO

• Interoperability with ZigBee devices from other vendors*
• Firmware upgrades via UART, SPI or over the air
• Advanced configuration options available via simple AT or API commands
• SMT form factor with side Castellations for easy soldering

• Common XBee footprint allows OEMs to support a variety of wireless protocols with one footprint
• Flexible SPI and UART serial interfaces
• RPSMA, PCB, U.FL and wired whip antenna options
• Support for low power sleeping applications with < 2 μA power-down current
• 802.11n provides up to 65 Mbps data rate

• Interoperability with ZigBee devices from other vendors†
• No configuration needed for out-of-the-box RF communications
• Common XBee footprint for a variety of RF modules
• Self-healing and discovery for network stability

• 32-bit system-on-chip with ARM926EJ-S core
• Integrated 10/100 Mbit Ethernet MAC
• On-chip high-performance encryption engine
• Power management and rich set of interfaces
• Drop-in replacement option for NS7520 designs

• 32-bit system-on-chip with ARM926EJ-S core
• Integrated 10/100 Mbit Ethernet MAC
• On-chip high-performance encryption engine
• Power management and rich set of interfaces
• Industrial operating temperature

• 55 MHz max clock speed
• 56+ I/O lines and 6 CMOS-compatible serial ports
• Ten 8-bit timers and one 10-bit timer with 2 match registers
• Hardware and/or software support for TCP/IP, IrDA, SDLC/HDLC, Async, SPI, I2C
• Extended low-power "sleepy" modes

• 60 MHz max clock speed
• Integrated 10Base-T Ethernet
• Supports 8-bit or 16-bit Flash and SRAM memories
• Extended low-power "sleepy" modes
• Watchdog timer

• Clock speed up to 200 MHz
• On-board 802.11 a/b/g and 10/100 Ethernet
• 64 I/O and up to 6 serial ports (4 as SPI)
• 1 MB internal DRAM and 32K battery backable SRAM
• USB 2.0 full speed host

• 8 channels of 12-bit analog output
• 24 protected and filtered digital inputs
• 16 high-speed protected sinking/sourcing digital outputs
• 6 SPDT Relays
• 10A maximum switching current (5A DC)

• Rabbit 4000 running at 40 MHz
• On-board Rabbit RIO® device for exceptional I/O functionality and flexibility
• Web Server functionality
• Easy implementation of mesh networking with known good hardware
• Dynamic C® software environment to reduce development time

• Uses Rabbit® 4000 and Rabbit 5000 microprocessors
• Choice of Wi-Fi, ZigBee or Ethernet connectivity
• 40 digital I/O and up to 5 serial ports
• 8 input and 2 output analog channels
• Advanced I/O subsystem is software configurable reducing the load on the processor

• 40 sinking/sourcing digital I/O
• Up to 512K Flash for program and up to 512K SRAM for data
• 16 digital outputs which can sink/source 200 mA
• 11 A/D and 4 D/A with 12-bit resolution
• Up to 4 serial ports: two 3-wire (or one 5-wire) RS-232 and 1 RS-485

• Rabbit® 3000 microprocessor at 44 MHz
• 10/100Base-T Ethernet, RJ-45
• 512K Flash/512K SRAM
• 36 digital I/O (configurations include protected digital inputs, sinking/sourcing outputs, high current outputs)
• 12 analog channels: eight 11-bit A/D, four 12-bit D/A buffered outputs

• Low power consumption less than 100 uA in power save mode
• 8 A/D inputs with 12 bit resolution
• Digital outputs can sink up to 200 mA
• 6 serial ports for multiple device connectivity
• 16 protected digital inputs

• Ideal for highly cost-competitive communication products
• Powerful and compact 16-Bit Rabbit MiniCore family
• Integrated Ethernet or 802.11b/g Wi-Fi connectivity
• Custom application development using Dynamic C

• Design flexible embedded I/O control and communication products
• Socket-compatible family of 16-bit RabbitCore modules
• Optional ZigBee and 802.11bg Wi-Fi connectivity and external storage
• Custom application development using Dynamic C

• Global LEO satellite coverage (no blockage)
• Simple serial interface for host communication
• Extremely compact module form factor
• Very low transmit and receive power consumption
• Industrial operating temperature and shock/vibration

• ZigBee to Ethernet/Wi-Fi IP gateways support numerous XBee protocols
• Multiple form factors and configuration options
• Commercial and industrial grade enclosures
• Easy development via iDigi® Dia and Python scripting as part of Digi ESP™ IDE
• iDigi® Device Cloud™ for secure, scalable access unlimited remote assets and seamless web services integration from Digi gateways into customer back office applications

• Full certification of ZigBee Alliance Smart Energy Public Application Profile 1.0 & 1.1
• 10/100 Ethernet for connecting to home Internet router
• Enables the Home Area Network (HAN) and additional Smart Energy products such as Programmable Communicating Thermostat (PCT) and In-Home Display (IHD) products available from many manufacturers
• Digi-hosted iDigi Energy cloud service used to manage connectivity, configuration and software upgrades
• Versions to support stand-alone Smart Energy networks and Smart Energy metering systems

• Low-cost gateway operates on European license-free 868 MHz ISM band
• Wireless M-Bus protocol complies with EN13757-4:2005 standards
• Supports AES128 encryption and OMS (Open Metering Standard)
• Facilitates enhanced service offerings
• Includes Python® for local applications; Upgradable to iDigi® Device Cloud™

• Certified ERT radio design used under Itron ERT license with support for all ERT "bubble-up" utility meters
• Supports multi-family housing and meter banks of up to 10 ERT meters with secure, encrypted data transmission
• 10/100 Ethernet for fast, secure networking
• Python® extensible firmware, with support for remote firmware upgrades and future standards development
• Supports iDigi™ platform providing robust, secure, scalable management services that easily connects with the energy service provider's application software

• Certified by multiple wireless carriers
• CDMA EV-DO Rev. A or GSM HSDPA/UMTS support
• Secure wireless WAN connection over high speed cellular network
• Upgradeable via enclosed PCMCIA or PCI Express modules
• Standard Ethernet, serial and USB ports, optional Wi-Fi and GPS

• WAN connectivity via 2G, GOBI 3G, 4G GSM/CDMA networks
• Small commercial grade enclosure or NEMA 4X/IP66 case with Class 1, Division 2 certifications
• Full routing/IP filtering plus IPsec/SSL VPNs with DES, 3DES or AES encryption
• Easy development environment via iDigi Dia and Python scripting as part of Digi ESP
• Support for Modbus/Modbus TCP

• Wireless telematics product supports cellular, satellite, GPS, Wi-Fi and VAN
• Factory sealed enclosure with IP67 and SAE1455 certifications
• J1939 CAN interface with J1708 serial connectivity support
• Two models available - ConnectPort X5 R and ConnectPort X5 Fleet
• Global cellular coverage over GSM/GPRS or CDMA networks

• Ethernet to high speed (2G/2.5G/3G/4G) wireless routers
• Enterprise primary and backup wireless WAN connectivity
• Unique Digi SureLink™ "always-on" connection
10/100Base-T or serial connection to existing router
• Industrial and GSM-R options available

• High speed cellular interfaces: GSM GPRS/EDGE/HSPA/CDMA EV-DO
• Optional integrated 802.11b/g Wi-Fi access point and 4-port Ethernet switch
• Flexible interfaces including serial, GPS, USB and telemetry
• Powerful integrated end user programming
• Component of PCI DSS compliant solution

• Reliable, high capacity (up to 3000 tunnels) VPN
• Easily configurable with any Digi VPN cellular router
• Configurable LCD screen shows status and performance statistics
• Approved for use in PCI networks for connection to remote POS devices

• Low-cost gateway operates on European license-free 868 MHz ISM band
• Wireless M-Bus protocol complies with EN13757-4:2005 standards
• Supports AES128 encryption and OMS (Open Metering Standard)
• Facilitates enhanced service offerings
• Includes Python® for local applications; Upgradable to iDigi® Device Cloud™

• Powerful and compact device networking solution
• Complete product customization option
• Switch selectable RS-232/422/485 interface
• Compact enclosure design with integrated mounting tabs
• Based on high-performance 32-bit NET+ARM processor

• Compact design with integrated mounting tabs
• Switch selectable RS-232/422/485 interface
• Enterprise-class 802.11i wireless security
• Product integration and customization flexibility

• Access and monitor USB and serial devices over TCP/IP network
• Works with existing POS or other application software
• Excellent in virtualized environments such as VMware®
• Creates systems redundancy and increases security
• Simplifies operations and reduces IT support

• Add 1, 2, 4, 8, or 16 serial ports to a PC or thin client in minutes
• RS-232, RS-422, or RS-485 serial ports (software selectable)
• USB, parallel ports or powered USB ports also available
• Galvanic isolated, industrial, compact and rugged metal models
• Rack-mount options

• 7 frequency hopping channels, each with 65K available addresses
• Outstanding receiver sensitivity (-110 dB @9600 bps)
• Indoor/Urban range up to 600 feet (180 m) @ 2.4 GHz
• Outdoor RF line-of-sight range Up to 3 mi (5 km) and 10 mi (16 km)

• ZigBee to Ethernet/Wi-Fi IP gateways support numerous XBee protocols
• Multiple form factors and configuration options
• Commercial and industrial grade enclosures
• Easy development via iDigi® Dia and Python scripting as part of Digi ESP™ IDE
• iDigi® Device Cloud™ for secure, scalable access unlimited remote assets and seamless web services integration from Digi gateways into customer back office applications

• Extends the range and strength of ZigBee Smart Energy networks
• Certification as a ZigBee Smart Energy device ensures interoperability
• Creates additional network pathways for more reliable mesh networking
• Plugs into a standard power outlet for easy installation
• Easy-to-use commissioning button provides a simple method for joining an existing Smart Energy network

• Supports the ZigBee PRO feature set
• ZigBee® wireless connectivity for all types of end-point devices
• Compatible with ConnectPort™ X gateways for IP connectivity
• Flexible powering options
• Outdoor RF line-of-sight range up to 1 mile with XBee-PRO®

• Compact, battery powered sensors with integrated ZigBee®
• Real-time temperature, humidity and light information
• Easy installation and configuration for rapid deployment
• Long battery life for reliable operation
• Small size for unobtrusive installation

• ZigBee to Ethernet/Wi-Fi IP gateways support numerous XBee protocols
• Multiple form factors and configuration options
• Commercial and industrial grade enclosures
• Easy development via iDigi® Dia and Python scripting as part of Digi ESP™ IDE
• iDigi® Device Cloud™ for secure, scalable access unlimited remote assets and seamless web services integration from Digi gateways into customer back office applications

• Monitor critical environmental data such as temperature, humidity, distance, acceleration, moisture
• Plug into XBee® sensor adapter for easy wireless connectivity*
• Monitor over a WAN connection using ConnectPort™ X gateway
• No external power supply needed

• Extends the range and strength of DigiMesh 2.4 GHz wireless networks
• Creates redundant network pathways for more reliable mesh networking
• Easy-to-use commissioning button provides a simple method for joining an existing DigiMesh 2.4 network
• Small form factor for unobtrusive deployment

• Simple topology to deploy and grow
• Self-healing and discovery for network stability
• Sleeping routers supported for long battery life
• No master/coordinator required
• Compatible with other devices using the DigiMesh protocol, like • ConnectPort X gateways, RF modules and more

• 802.15.4 wireless connectivity for all types of end-point devices
• Compatible with ConnectPort™ X gateways & XBee modules
• Multiple interface options available for a variety of devices
• Small form factor for easy handling and installation
• Low-power XBee and extended-range XBee-PRO options

• USB plug-and-play USB to XBee Network Adapter
• Available in ZigBee mesh (ZB) & multipoint (802.15.4) variants
• Configure and commission XBee networks easily from your laptop or PC

• TCP/UDP Socket Services for broad device connectivity
• Modbus serial to Modbus/TCP protocol conversion
• Switch selectable RS-232/422/485
• Industrial DIN rail mounting
• Tunable for low latency or optimized throughput

• Industrial protocol conversion and interoperability
• 1 DB-9 serial port and additional pass-through port
• Multi-master/multi-protocol support
• Switch selectable RS-232/422/485
• Tunable for low latency or optimized throughput

• 1, 2 or 4 RS-232 RJ-45 serial ports
• 9-30VDC power supply

• 8 or 16 RS-232 or software selectable RS-232/422/485 serial ports
• SSHv2 ensures encrypted connections
• RealPort® with encryption provides SSL-based protection
• Ports may be shared between multiple hosts running different OS

• Dual IPv4/IPv6 stack
• Tx/Rx LEDs per serial port
• Patented RealPort® technology for COM/TTY port control/ management
• SSL/TLS and SSHv2 for added security
• Easy configuration and management through web browser or CLI

• Serial port device server and Ethernet switch
• Python development environment for custom applications
• IPv4/IPv6 capable
• SLS/TLS and SSHv2 for added security

• Connect serial devices to an 802.11b/g wireless LAN and 10/100 Ethernet network
• 1, 2 or 4 ports
• Switch selectable RS-232/422/485 serial RJ-45
• Strong 802.11i wireless LAN security

• PCI-X & 64-bit slot compatible
• 4- and 8-port serial cards with low profile options
• Industry leading surge protection on all signals
• Large data buffers for efficient data transfer
• 921.6 Kbps bi-directional on all RS-232 serial ports

• Expandable to 64 ports
• Surge suppression embedded on board
• Rack-mountable options
• Low profile option

• Intelligent serial connectivity for larger systems
• Up to 128 RS-232 serial ports on a single slot
• Serial ports can be located up to 1000 feet from server
• PCI-X & 64-bit slot compatible

• Intelligent serial connectivity for larger systems
• Up to 128 RS-232 serial ports on a single slot
• Serial ports can be located up to 1000 feet from server
• PCI-X & 64-bit slot compatible

• Integrated modem adapters for high-speed analog connections
• Up to 8 ports with full V.90 modem and fax support
• 4 or 8 channels in a single PCI slot
• Highly scalable system architecture
• Flexible design based on Digital Signal Processors (DSPs)

• Integrated modem adapters for high-speed analog connections
• Up to 8 ports with full V.90 modem and fax support
• 4 or 8 channels in a single PCI slot
• Highly scalable system architecture
• Flexible design based on Digital Signal Processors (DSPs)

• PCI bus support
• 4 or 8 RS-232 serial ports
• DB-9, DB-25 or RJ-45 connectors
• Supports speeds up to 460.8 Kbps
• Surge suppression on all signals